1 results listed
In recent years, additive manufacturing (AM) has attracted much attention due to the capability of
providing more effective, lower cost, and higher productivity solutions rather than the conventional
melting and powder metallurgical methods for the NiTi components. As part of AM, the Electron
Beam Melting (EBM) method enables novel opportunities for direct melting of materials in a vacuum
environment using a high-power electron beam and to produce desired parts through layer by layer
deposition. In this study, Ti-55Ni (wt. %) nickel titanium alloy fabricated via EBM is investigated to
determine the effect of process conditions on the microstructural properties of the alloy. Son yıllarda NiTi alaşımları için, geleneksel ergitme ve toz metalurjisi yöntemlerine göre daha etkili,
düşük maliyetli ve yüksek üretim kapasitesine sahip olması, nedeniyle katmanlı imalata olan ilgi
önemli ölçüde artmıştır. Katmanlı imalat kapsamında, Elektron Demet Ergitme (EBM) yöntemi,
vakum ortamında, yüksek güçteki elektron demeti ile arzu edilen parçaların katmanlı bir şekilde
üretilmesine olanak sağlaması nedeniyle malzemelerin direkt ergitilmesi hususunda yeni imkanlar
sağlamaktadır. Bu çalışmada, EBM yöntemi ile üretilen Ti-55Ni (% ağ.) nikel-titanium alaşımı
incelenerek, proses koşullarının alaşımın mikroyapısal özellikleri üzerine etkisi irdelenmiştir.
International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry
3D-PTC2019
Gozde S. Altug-Peduk
Savas Dilibal
Ola Harryson
Sunullah Ozbek