INVESTIGATION OF MICROSTRUCTURAL BEHAVIOR OF NICKEL-TITANIUM ALLOY PRODUCED VIA ADDITIVE MANUFACTURING
Gozde S. Altug-Peduk Savas Dilibal Ola Harryson Sunullah Ozbek
AbstractIn recent years, additive manufacturing (AM) has attracted much attention due to the capability of providing more effective, lower cost, and higher productivity solutions rather than the conventional melting and powder metallurgical methods for the NiTi components. As part of AM, the Electron Beam Melting (EBM) method enables novel opportunities for direct melting of materials in a vacuum environment using a high-power electron beam and to produce desired parts through layer by layer deposition. In this study, Ti-55Ni (wt. %) nickel titanium alloy fabricated via EBM is investigated to determine the effect of process conditions on the microstructural properties of the alloy. Son yıllarda NiTi alaşımları için, geleneksel ergitme ve toz metalurjisi yöntemlerine göre daha etkili, düşük maliyetli ve yüksek üretim kapasitesine sahip olması, nedeniyle katmanlı imalata olan ilgi önemli ölçüde artmıştır. Katmanlı imalat kapsamında, Elektron Demet Ergitme (EBM) yöntemi, vakum ortamında, yüksek güçteki elektron demeti ile arzu edilen parçaların katmanlı bir şekilde üretilmesine olanak sağlaması nedeniyle malzemelerin direkt ergitilmesi hususunda yeni imkanlar sağlamaktadır. Bu çalışmada, EBM yöntemi ile üretilen Ti-55Ni (% ağ.) nikel-titanium alaşımı incelenerek, proses koşullarının alaşımın mikroyapısal özellikleri üzerine etkisi irdelenmiştir.