2 results listed
The aim of this study is to investigate the behaviour of screwdriving torques in wood-plastic
nanocomposite. The nanocomposite material prepared from black pine wood flour (Pinus nigra J.F. Arnold subsp.
nigra var. caramenica (Loudon) Rehder) and magnezum oksit (MgO) will be selected as reinforced material.
Factors investigated will be pilot-hole diameter and screw type. There are two main screw driving torques of
seating and stripping has been already defined for oriented strandboard (OSB), particleboard (PB), and wood
plastic composite (WPC) in the literature. Giving a short definition of screwdriving torques in these materials, the
seating torque is the torque required to clamp parts and stripping torque is the maximum torque before the torque
drops sharply because of the formed threads being stripped by the screw [1,3]. However, there is no such an
information about the screwdriving torques in the case of nancomposite material. For this reason, the behaviour of
screwdiriving torques will be investigated and effects of pilot-hole diameter and screw type on these screwdiriving
torques will be evaluated for this material.
International Symposium on Light Alloys and Composite Materials
UHAKS
Önder TOR
Alperen KAYMAKCI
Mehmet KARAMANOĞLU
Isıl işlem, hücre çeperinin polimer bileşiklerinin kimyasal kompozisyonunda kalıcı değişmelerle
sonuçlanan fiziksel bir işlemdir. Metodun temel fikri kimyasal reaksiyonların hızlandığı yaklaşık 150 oC’nin
üzerindeki sıcaklıklarda ağaç malzemenin ısı ile muamele edilmesidir. Isıl işlem uygulaması odunun moleküler
yapısının modifiye edilmesine yol açtığından fiziksel performansını arttırmaktadır. Isıl işlem uygulanmış kereste
bina dış cephe kaplaması, iç mekan kaplamaları, parke ve döşeme tahtası, park ve bahçe mobilyaları, bahçe çitleri,
çocuk oyun alanı, pencere ve pencere panjurları, iç ve dış kapı, sauna ve sauna elemanları, iç mekan mobilyaları
ve müzik aletleri yapımında kullanılmaktadır (Akkılıç ve diğ., 2014; Karamanoğlu ve Akyıldız, 2013; Gündüz et
al., 2007; Korkut and Kocaefe, 2009).
International Symposium on Light Alloys and Composite Materials
UHAKS
Mehmet KARAMANOĞLU
Alperen KAYMAKCI
Önder TOR