3 results listed
Biodegradable polymers derived from renewable resources are considered as promising alternatives to
petroleum-based polymer. Among the biodegradable polymers, polylactic acid (PLA) has attracted attention due to having
properties such as biodegradable, environment friendly, and biocompatible. Although PLA has these advantages, it can
not be used in many applications due to its low gas barrier properties, thermal stability, brittle and cost. In this study,
PLA/PEG/silica obtained from rice husk composite films were prepared using solvent casting method. The thermal and
structural properties of the prepared composite films were determined by SEM (scanning electron microscope), TGA
(thermogravimetric analysis) and water absorption capacity test. According to results of analysis, the addition of silica to
the PLA-PEG films improved the thermal stability and increased the water absorption capacities of PLA-PEG films.
International Symposium on Light Alloys and Composite Materials
UHAKS
Buğçe Özoğul
Feza Geyikçi
In this study, polymeric Nafion membrane and inorganic mesoporous silica was used to prepare composite
membranes by using solvent-casting method for PEM fuel cells. Mesoporous silica (SCMS) was doped as 1 and 3 wt.%.
Structural properties of the composite membrane were investigated by Thermogravimetric analysis (TGA), Scanning
electron microscopy (SEM), water uptake and gas permeability tests with pristine Nafion membrane. Results showed that
adding of 1 wt% silica SCMS into Nafion has improved the thermal stability of the structure, increased water uptake
capability of membrane and decreased gas permeability of the structure.
International Symposium on Light Alloys and Composite Materials
UHAKS
Candan Karaeyvaz
Buğçe Özoğul
Berker Fıçıcılar
Feza Geyikçi
Çimento, ana hammaddeleri kalkerle kil olan ve mineral parçalarını (kum, çakıl, tuğla ve briket gibi) yapıştırmada kullanılan bir malzemedir. Her türlü yapı sisteminde farklı uygulama alanlarında kullanılan betonun ana bileşeni çimentodur. Endüstriyel açıdan bakıldığında dünyada yılda üretilen çimento miktarının 2010 yılında 2.8 milyar ton/yıl olması beklenmektedir. Son yıllarda çimento üretim endüstrisinde çeşitli doğal ve atık materyallerin değerlendirilmesine yönelik çalışmalar gittikçe artmış, uygun miktarda doğal ve atık malzeme kullanımıyla hem çevresel hem de ekonomik fayda sağlanabileceği görülmüştür. Birçok araştırmacı, çimentoda katkı maddesi olarak uçucu kül, taban külü, kolemanit konsantratör atığı, ve bentonit, zeolit, sepiyolit gibi doğal materyaller ile ile bunların ikili veya üçlü karışımlanm kullanmak suretiyle aynı anda farklı türde doğal ve atık materyallerin çimento üretiminde değerlendirilebilirliğini incelemişlerdir. Bu çalışmada sepiyolit minerali kullanılarak katkılı çimentolar üretilmiştir. Çimentoların fiziksel ve mekanik özelikleri TS EN 196-1 standardına uygun olarak belirlenmiş ve elde edilen sonuçlar karşılaştırılmıştır.
Tuketim Toplumu ve Cevre Sempozyumu
TTCS
Cem KILICOGLU
Feza Geyikçi
Semra Coruh