1 results listed
Hızlı prototipleme ve eklemeli imalat olarak da bilinen 3D (üç-boyutlu) baskı yöntemi dünyadaki
birçok farklı sektörde hızla genişleyen bir kullanım alanına sahip olmuştur. Sunduğu en önemli
avantajlardan biri olan kişiye özel üretim kabiliyeti ile 3D baskı, tıp alanındaki biyomedikal cihazların
tasarım ve üretimini önemli ölçüde etkilemiştir. Bu açıdan bakıldığında, 3D baskı yöntemi, hastaya
özel olarak üretilen ortezlerin imalatında da önemli fırsatlar sunmaktadır. Ortezler travmatik veya
nörolojik nedenlerle görevini yerine getiremeyen uzuvları destekleyen, vücudun herhangi bir kısmına
eksternal olarak uygulanan cihazlardır. Ortezlerin hastanın uzuv veya vücut bölgesinin şekline göre
üretilmesi ve seri üretime uygun olmaması gibi nedenler araştırmacıları 3D baskı teknolojilerine
yöneltmiştir. Son yıllarda farklı tip ortezlerin 3D yazıcılarla üretimi ile ilgili birçok çalışma yapılmış
ve bu çalışmalardan önemli bilgiler elde edilmiştir. Bu makalede çeşitli 3D baskı teknolojileri
kullanılarak ortez üretimi ile ilgili yapılan uygulamalar incelenmiş ve tasarımdan son ürüne kadar
gerçekleştirilen işlem adımları ortaya konulmuştur. Bununla beraber ortez imalatında kullanılan 3D
baskı teknolojileri ve malzemeleri de değerlendirilmiş ve 3D baskı süreci ile ilgili bazı önemli püf
noktalarına değinilmiştir. 3D (three-dimensional) printing method, also known as rapid prototyping and additive manufacturing,
has started to have a rapidly expanding usage area in many different sectors around the world. 3D
printing has significantly influenced the design and production of biomedical devices through its
customizable production capability that is one of the most important advantages of it. Therefore, the
3D printing method provides an important opportunity for the manufacturing of patient-specific
orthoses. Orthoses are devices that are applied externally to any part of the body for supporting limbs
that cannot perform their functions due to traumatic or neurological causes. The reasons such as the
manufacturing of orthoses according to the shape of the limb or body region of the patient and not
being suitable for mass production have led researchers to 3D printing technologies. In recent years,
many studies about the manufacturing of different types of orthoses with 3D printers have been carried
out and valuable information has been generated from these studies. In this article, applications of
orthosis manufacturing by using various 3D printing technologies were examined and the process
steps from design to final product were introduced. In addition, 3D printing technologies and materials
used in the manufacturing of orthoses were evaluated and some important tips about the 3D printing
process were mentioned.
International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry
3D-PTC2019
Hasan Kemal SÜRMEN