SU GERİ KAZANIM PROJESİ MODELLEMESİ VE 3 BOYUTLU YAZDIRILMASI
AbstractDünya üzerinde tatlı suların çoğu denizlere bağlanmaktadır. Bu nedenle içme suyu veya tarım arazilerinin sulanmasında kullanılamamaktadır. Türkiye’de tatlı suların tekrar kullanılması amacıyla bir proje yapılmıştır. Bu proje Karadeniz’e dökülen Sakarya nehrinin tekrar kullanılması hedeflenmiştir. Bu amaçla Sakarya nehri ve Sakarya bölgesinin fiziki coğrafya haritası incelendi. Daha sonra Sakarya bölgesinin fiziki yapısına yakın boyutlarda 3B tasarımı yapılmıştır. Tatlı suyun Karadeniz kenarından taşınması için güzergâh belirlenmiştir. Tatlı suyun taşınması için su kanalları, dağın tepesine suyun taşınması için pompa seçimi yapılmıştır. Tasarımı yapılan Sakarya’nın fizik haritası ve tatlı su güzergahının 3D prototip üretimi yapılmıştır.Most of the fresh waters on the world are connected to the seas. Therefore, it cannot be used for irrigation of drinking water or agricultural land. Re-use of freshwater in Turkey were made for the purpose of a project. This project is aimed at the re-use of the Sakarya River, which is poured into the Black Sea. For this purpose, physical geography map of Sakarya river and Sakarya region was examined. Then, the 3D design of the Sakarya region was carried out in close dimensions. The route for transporting fresh water from the edge of the Black Sea has been determined. Water channels for the transportation of fresh water, pump for the transportation of water to the top of the mountain has been selected. It is aimed to produce 3D prototypes of Sakarya's physical map and freshwater route.