MEKATRONİK SİSTEMLER TASARIM PROJESİ OLARAK ÜÇ BOYUTLU YAZICI TASARIMI VE İMALATI
Hüseyin KAYGISIZ Erkan İNCEKAR Aytaç Uğur Yerden
AbstractÜç boyutlu yazıcılar hayatımıza çok hızlı girmiş ve birdenbire birçok alanda kullanılmaya başlanmış bir teknolojidir. Bu cihazlar ilkokuldan üniversiteye birçok derste eğitim materyali olarak kullanılabilecek özelliklere sahiptir. Öğrencilerin derslere olan ilgisini artırmak ve öğrenme sürecini hızlandırmak için teknik resimler-tasarımlar üzerinden geometrik yapılar üretilebilir, üç boyutlu yazıcının mekanik, mekatronik ve kod yapısı hakkında bilgiler paylaşılabilir. Bu bağlamda çalışma kapsamında; okulların kendi olanakları ile imal edebilecekleri yukarıda bahsedilen bütün fonksiyonları yerine getirebilecek düşük bütçeli bir yazıcı tasarlanmış, üretilmiş ve ders ortamında kullanılarak test edilmiştir. Geliştirilen cihaz ABS, PLA gibi plastik malzemeler kullanarak FDM (Fused Deposition Modeling) yöntemi ile çalışmaktadır. Çalışma alanı ise her eksen için 200 mm dir. Şase için pleksi malzeme tercih edilmiş, fanuc kod yapısına uyumlu çalışabilecek şekilde step motorlar ve Ardunio Mega Ramp 1.4 kullanılmıştır. Cihaz 2017-2018 bahar eğitim öğretim döneminde, İstanbul Gedik Üniversitesi Meslek Yüksek Okulu Makine Programı, mekatronik sistemler dersinde tasarlanmış ve öğrenciler tarafından üretilmiştir. Ayrıca Bilgisayar Destekli Tasarım (CAD) ve Bilgisayar Destekli İmalat ve Robotlar derslerinde ders materyali olarak kullanılarak test edilmiştir. Three-dimensional printers is a technology that has entered our lives very quickly and has been used suddenly in many areas. These devices have the features that can be used as training material in many courses from primary to university. In order to increase the interest of the students and to accelerate the learning process, geometrical structures can be produced through technical drawings-designs, and information about the mechanical, mechatronics and code structure of the 3D printer can be shared. In this context; A low-budget printer that can perform all the functions mentioned above can be designed, manufactured and tested in a classroom environment. Developed device using ABS, PLA plastic materials such as FDM (Fused Deposition Modeling) method works with. The working area is 200 mm for each axis. Plexi material was preferred for the chassis, stepper motors and Ardunio Mega Ramp 1.4 were used in order to work in accordance with the fanuc code structure. The device was designed and produced by students at the Istanbul Gedik University Vocational School Mechatronics Systems course in 2017-2018 spring education period. In addition, the computer aided design (CAD) and Computer Aided Manufacturing and Robotics courses were tested using the course material.